Z-Axis Calibration

Post Reply
donix
Posts: 1
Joined: Sat Nov 02, 2019 10:11 pm

Z-Axis Calibration

Post by donix »

since my Z-Axis moves jut 30mm insted of 200mm, i wanted to adjust the default_axis_steps_per_unit.
Changing the parameters (configuration.h) works for X and Y axis, but the Z-Axis stays unchanged at 400 !!
Top
User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Z-Axis Calibration

Post by William »

Hi,If you want to change the step value, you can try to change it and save it on the screen.
-Keep your mind and try to test it. :)
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
Top
Post Reply

Return to “Geeetech I3 Pro C”