Prusa i3 pro B

Post Reply
Simone
Posts: 3
Joined: Mon May 11, 2020 8:22 pm

Prusa i3 pro B

Post by Simone »

Ciao a tutti, ho completato il montaggio solo che mi da un errore Mintemp, non capisco cosa devo fare e quale programma scaricare per il windows, è la prima volta che monto una stampante 3D, qualcuno puo' aiutarmi?

grazie
User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Prusa i3 pro B

Post by William »

Hi,you can check whether the screen cable is connected.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
Simone
Posts: 3
Joined: Mon May 11, 2020 8:22 pm

Re: Prusa i3 pro B

Post by Simone »

yes the screen also works the menu I read it but I do not understand the error MINTEMP
User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Prusa i3 pro B

Post by William »

Hi,you can unplug the motor line of the extruder to see if it shows - 14 ℃.
If - 14 ℃ is displayed, there may be a problem with the thermistor.
If - 14 ℃ is not displayed, it is the problem of the main board.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
Mark58
Posts: 1
Joined: Wed Nov 24, 2021 6:51 pm

Re: Prusa i3 pro B

Post by Mark58 »

This is a very informative blog for me. I am very much benefited after reading this blog. Keep sharing.

www.mybalancenow.com
Post Reply