Extruding too much! Ask for 5mm get 50mm

[XYZM]

Sounds like a simple fix, can any one help.

Thank you

[Mark]

What's your printer type? and what's the E steps per mm in your malin firmware?

[XYZM]

It ended up being the steps on my driver. So its closer to range, just now it seems to be not as thick as before though.

I am set to 95 steps in the software

[XYZM]

I have the i3 B with the GT2560 board and MK8 extruder.


Do you recommend a better type of extruder for future use?