slicer settings 0.3mm

Post Reply
24ariel3
Posts: 21
Joined: Sun May 24, 2015 10:03 pm

slicer settings 0.3mm

Post by 24ariel3 »

I'm looking for good slicer settings for i3 PRO B with nozzle diameter of 0.3mm

so far I'm not able to get good prints

Thank you!
Mark
Posts: 1553
Joined: Thu Aug 06, 2015 9:19 am

Re: slicer settings 0.3mm

Post by Mark »

check the link here, the user manual has a config.ini for you to refer to:
http://www.geeetech.com/acrylic-geeetec ... p-917.html
Post Reply