Wrong parts for the X axis motor ends. Help!!!

[Shadrack]

I am following the steps and on the building instructions for the X axis motor mounts they have a part, 37, that isn't included. This is supposed to be an aluminum sleeve bearing holder that screws in with 4 screws.
Well it looks like I am supposed to use a couple of the black smaller sleeve bearing holders that should fit together but the mount holes don't line up. I would be able to screw in one, but at is it.

Help.

[Admin]

if it is missing, you can contact after sale service to send you replacement.

[Shadrack]

It isn't that it is missing. It is just the wrong instructions. Instead of one aluminum part 37 I have extra part 36, and would need to use two of these in place of one aluminum one. Problem is that the acrylic parts have 4 holes drilled for a part 37, instead of 8 holes drilled that I need to use 2 x part 36.
I hope that makes sense.

[Admin]

please contact the seller for a replacement

[Shadrack]

I just drilled the holes out myself. This was more to let you know that it is very frustrating to have old manuals when the parts have changed and even the youtube videos are wrong.

[Admin]

I just drilled the holes out myself. This was more to let you know that it is very frustrating to have old manuals when the parts have changed and even the youtube videos are wrong.

We did updated in the user manual and remind customers to pay atention to the difference in the video . The reseller may forgot to update it. You can check the ones on our website.

sorry for the inconvenience may caused to you