Hello,
i built up the whole system but there appear ony squares in the LCD. Also the GT2560 is not been found by my PC or different Laptops.
Only Squares on LCD and not found by PC or Laptop
Re: Only Squares on LCD and not found by PC or Laptop
hi,I'm sorry to hear that.but I'll give you some tips,as follows:
first,if you have the LCD display problem,click this link:viewtopic.php?f=23&t=17040;
second,if your computer can't detect your printer,then maybe you should install the driver software on your computer.
first,if you have the LCD display problem,click this link:viewtopic.php?f=23&t=17040;
second,if your computer can't detect your printer,then maybe you should install the driver software on your computer.
-Keep your mind and try to test it. 
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
Re: Only Squares on LCD and not found by PC or Laptop
Hello, i already installed the driver. I own two other 3D printers wich work perfekt. The Device isn't even recogniced by my computer. Not even in the device manager.
The LCD only schows squares. When i turn the little potti at the backside only the brightnes changes. I wired the LCD as schown in video, as i told my other Prusa models work fine with the same setup.
The LCD only schows squares. When i turn the little potti at the backside only the brightnes changes. I wired the LCD as schown in video, as i told my other Prusa models work fine with the same setup.