Acrylic I3 Pro B printing problems, filament

Post Reply
nektor
Posts: 1
Joined: Mon Mar 06, 2017 8:26 am

Acrylic I3 Pro B printing problems, filament

Post by nektor »

Hello,

I've assembled an Acrylic I3 Pro B printer from you and I'm not certain what are the correct settings to set in Slicer for successful printing. I've attached photos of documents that were present in the box if that would help You identified the extruder type. What is the correct configuration for this printer/extruder? (stuff like nozzle diameter and such). Ideally could you please send me a working configuration file I could use? (and in what program/version to use it)

I also wonder what type of sample filament was present in the box (photos are attached). I presumed that it was ABS and tried printing with default settings using 220C for extruder and 75C for the bed, but the results were messy and I stopped the printing immediately.

Thank You for your advices in advances and have a nice day,

Nektor
Attachments
filament
filament
3d_p4.jpg (449.2 KiB) Viewed 5503 times
nozzle/extruder
nozzle/extruder
3d_p3.jpg (399.3 KiB) Viewed 5503 times
photo of attached documents
photo of attached documents
3d_p2.jpg (610.65 KiB) Viewed 5503 times
photo of attached documents
photo of attached documents
3d_p1.jpg (562.4 KiB) Viewed 5503 times
User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Acrylic I3 Pro B printing problems, filament

Post by William »

the filament in your picture is PLA.and there's a link of the printing config file(config.ini) in your User Manual
[img]C:\Users\Administrator\Desktop[/img]
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Acrylic I3 Pro B printing problems, filament

Post by William »

[img src="C:\Users\Administrator\Desktop"][/img]
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Acrylic I3 Pro B printing problems, filament

Post by William »

hi
Attachments
20170306174219.png
20170306174219.png (16.53 KiB) Viewed 5500 times
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
Post Reply