HI there. My rostock 301 will not get any further than 4% when printing from the SD Card. I have tried different SD Cards and they all work on I3 Aluminium. The printer completes the print when using the USB cable.
Can someone help.
Rostock 301 not completing print from SD Card
Re: Rostock 301 not completing print from SD Card
You can press the SD slot and confirm the connection between the SD card and the SD slot is OK.
-Keep your mind and try to test it. 
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
-
Carlo Heller
- Posts: 1
- Joined: Tue Jan 25, 2022 4:34 pm
Re: Rostock 301 not completing print from SD Card
I was having issues with the stock Rostock 301 heated bed not completing the print from SD Card. After many hours of troubleshooting, I have read paperhelp review and found that inserting a piece of tape between the connector and the bottom of the bed worked 100% of the time. Hope this helps someone else out there.