Page 2 of 3
Re: Pitting , Hole , Defect on printing
Posted: Thu Apr 09, 2015 11:17 am
by zhangxueyou
Your slicer setting is so bad. Look at the picture, the blue one , which is so bad that I even don't want to continue printing, is printed with your settings, and the green oneis printed with my settings. You can try my settings (attachment), and modify some parameters properly as I suggested you before .
- QQ截图20150409111242.png (451.35 KiB) Viewed 13317 times
Re: Pitting , Hole , Defect on printing
Posted: Thu Apr 09, 2015 5:01 pm
by begizmo
Hi
Thank for you recommend .
I try to load chinese chess like yours for compare
Overall about pitting , hole and first layer it is better
But I see new problem
I think my x or y or ? axis will be problem
- FullSizeRender (56).jpg (77.15 KiB) Viewed 13284 times
- FullSizeRender (57).jpg (77.87 KiB) Viewed 13284 times
Could you seggest me ?
My circle chess it is not round and top surface not smooth .
Thank in advance ^^
Re: Pitting , Hole , Defect on printing
Posted: Fri Apr 10, 2015 12:02 pm
by zhangxueyou
Did you use my settings? Please print this test file with SD card.
Re: Pitting , Hole , Defect on printing
Posted: Fri Apr 10, 2015 1:59 pm
by begizmo
- FullSizeRender (59).jpg (80.55 KiB) Viewed 13280 times
- FullSizeRender (60).jpg (87.3 KiB) Viewed 13280 times
- FullSizeRender (61).jpg (89.21 KiB) Viewed 13280 times
Re: Pitting , Hole , Defect on printing
Posted: Fri Apr 10, 2015 2:05 pm
by zhangxueyou
PLA or ABS?
Re: Pitting , Hole , Defect on printing
Posted: Fri Apr 10, 2015 2:15 pm
by begizmo
ABS sir
I already change temperature in your gcode to 230 c
Re: Pitting , Hole , Defect on printing
Posted: Fri Apr 10, 2015 2:49 pm
by zhangxueyou
Turn off the printer, is it easy to manually move X and Y axes?
Re: Pitting , Hole , Defect on printing
Posted: Fri Apr 10, 2015 2:55 pm
by begizmo
Yes it easy
Re: Pitting , Hole , Defect on printing
Posted: Fri Apr 10, 2015 3:23 pm
by zhangxueyou
Tighten the belts a bit, not too much. Maybe they are too loose.
Re: Pitting , Hole , Defect on printing
Posted: Fri Apr 10, 2015 10:13 pm
by email4walker
Hi begizmo,
I used to get bad prints like yours when I first started. It is a settings issue. Try lowing your print speed on the perimeter. I use MatterControl for my 3D printing software/interface. How it works is not really better than the other one, but it has a way better visual look. Also, you can click the help on it and it tells you what every setting does. No more guessing what a setting will do. Either way, try slowing down your print speed. That will help some. Thanks.
Oh yeah, it is free:
http://www.mattercontrol.com/