Page 2 of 2
Re: Z motors dont move up when printing(M8x2mm leadscrews).
Posted: Fri Jul 07, 2017 5:10 pm
by fran20172017
I also had to put 400 and now it works.
I do not get it.
To get that number you have to put a 4: 1 relationship
Re: Z motors dont move up when printing(M8x2mm leadscrews).
Posted: Fri Jul 07, 2017 5:11 pm
by fran20172017
I also had to put 400 and now it works.
I do not get it.
To get that number you have to put a 4: 1 relationship
Re: Z motors dont move up when printing(M8x2mm leadscrews).
Posted: Sat Jul 08, 2017 10:56 pm
by JonahUK
Although the pitch is 2mm, you have 4 starts so its 1600/4

Re: Z motors dont move up when printing(M8x2mm leadscrews).
Posted: Mon Jul 10, 2017 11:01 pm
by fran20172017
Ok, thank you I had not seen it explained anywhere.