But thanks for helping!!
GT2560 not working/possible manufacture failure
-
alex.zapsa
- Posts: 7
- Joined: Thu Apr 09, 2015 8:22 pm
Re: GT2560 not working/possible manufacture failure
Yes, I will do that!
But thanks for helping!!
But thanks for helping!!
Re: GT2560 not working/possible manufacture failure
I don't mean to hijack your thread but I noticed the + Positive pads on the back are soldered together but the pictures on Geeetech wiki for GT2560 board have each pad individual (no bridging pads). I haven't connected mine yet in case that is an issue.
I have a couple questions
1.) Which set of terminals supplies power to the heatbed and which supplies power for the logics? The set closest to the USB plug or fartherest away.
2.) Reading the description of the board implies a 12v and 24v powersupply could be connected at the same time delivering power to their respective hardware, am I correcting in assuming this?
3.) Does the heatbed terminal set power the hotend as well?
Thank you
I have a couple questions
1.) Which set of terminals supplies power to the heatbed and which supplies power for the logics? The set closest to the USB plug or fartherest away.
2.) Reading the description of the board implies a 12v and 24v powersupply could be connected at the same time delivering power to their respective hardware, am I correcting in assuming this?
3.) Does the heatbed terminal set power the hotend as well?
Thank you