Page 2 of 3
Re: extruder Extension Board diagram
Posted: Sun Mar 22, 2020 6:50 pm
by wbe
or >
green - red - yellow
black - white
Re: extruder Extension Board diagram
Posted: Tue Apr 14, 2020 5:25 pm
by dasch3a
Hi,
Could you also make a photo with wire colours for the extension board of the A30? I want to connect the 3d touch.
Greetings
Re: extruder Extension Board diagram
Posted: Tue Apr 14, 2020 6:14 pm
by William
Hi, you can refer to this:
- 转接板的对应.png (630.91 KiB) Viewed 14254 times
Re: extruder Extension Board diagram
Posted: Tue Apr 14, 2020 7:05 pm
by dasch3a
But how? My extension board looks like the first photos in this thread.
Re: extruder Extension Board diagram
Posted: Tue Apr 14, 2020 10:03 pm
by dasch3a
Is it possible that the first photo ist wrong? I thought the capacitive sensor uses only 3 pins (the lower ones) and rhe 3d touch the upper 5 pins? Or am I completely wrong?
Greetings
Re: extruder Extension Board diagram
Posted: Wed Apr 15, 2020 11:06 am
by William
Hi，
maybe this can help you.
- DSC_3789.JPG (121.87 KiB) Viewed 14214 times
- TIM图片20200415110752.png (559.01 KiB) Viewed 14214 times
Re: extruder Extension Board diagram
Posted: Mon Apr 20, 2020 5:38 am
by dasch3a
Thank you!
Re: extruder Extension Board diagram
Posted: Sun Aug 02, 2020 8:50 am
by coolineho
William wrote: Wed Apr 15, 2020 11:06 am
Hi，
maybe this can help you.
DSC_3789.JPG
TIM图片20200415110752.png
Hi,
Do you have the full pinout of this board? I am trying to convert my A10M from 2in1out to a 2in2out, so I need to add a hot end heater and a thermistor. Is this extension board compatible with this modification?
Re: extruder Extension Board diagram
Posted: Thu Aug 13, 2020 4:30 pm
by gopher
William, i'm interested in the full pinout of the new extension board too!
Thanks in advance)
Re: extruder Extension Board diagram
Posted: Fri Aug 14, 2020 5:16 pm
by William
Maybe it can help you
- .png (456.42 KiB) Viewed 11727 times