Page 24 of 39
Re: Firmware for geeetech 3D printers
Posted: Fri Nov 03, 2017 2:57 pm
by johndang
If there is an issue that bothers you, please simply contact geeetech customer support. You can also get help from
http://3dinsider.com/3d-printing-guide/.
Re: Firmware for geeetech 3D printers
Posted: Sat Nov 04, 2017 5:20 am
by bummer6
[quote=William post_id=81293 time=1509605392 user_id=51382]
You can modify the Z steps/mm via LCD.
LCD->Control->motion->Z steps/mm ;
After changing the value, you need to store memory.
LCD->Control->Store memory
Then re-start your printer.
[/quote]
There is no "Store memory" option available through the LCD menu. I also tried using the M500 command through Pronterface, but it still didn't save.
Re: Firmware for geeetech 3D printers
Posted: Mon Nov 06, 2017 11:48 am
by William
Maybe you can take a video of the issue.It can make issue easier to solve.
looking for suitable firmware
Posted: Thu Nov 16, 2017 7:02 pm
by Holger12435
hi Guys,
I recently acquired Geeetech Pro W 2017
from here:
https://www.ebay.de/itm/DE-Verk%C3%A4uf ... 2749.l2649
I am now looking for the sources for the right firmware and am completely confused in the many variants. I would like to hire the language in German and add support for bed auto leveling. I ask for help. My board is GT2560...
Thank you very much!
best regards Holger
Re: Firmware for geeetech 3D printers
Posted: Sun Nov 19, 2017 5:18 am
by HugoS
Hi there!
Does someone have the firmware for the Giantarm D200 ?
I mean a firmware that you can read and change with the Arduino IDE, like Marlin.
I know I can update the firmware with easyprint3d and I already did that, but I really want to modify the firmware of this printer.
Do you know which firmware is running on it? Is it also Marlin?
Has anyone tried a custom firmware on this printer?
Any idea of the parameters, like board type, pins, etc.?
Re: looking for suitable firmware
Posted: Mon Nov 20, 2017 11:22 am
by William
Holger12435 wrote: Thu Nov 16, 2017 7:02 pm
hi Guys,
I recently acquired Geeetech Pro W 2017
from here:
https://www.ebay.de/itm/DE-Verk%C3%A4uf ... 2749.l2649
I am now looking for the sources for the right firmware and am completely confused in the many variants. I would like to hire the language in German and add support for bed auto leveling. I ask for help. My board is GT2560...
Thank you very much!
best regards Holger
How is it going on? Any issue?
Re: Firmware for geeetech 3D printers
Posted: Mon Nov 20, 2017 11:24 am
by William
HugoS wrote: Sun Nov 19, 2017 5:18 am
Hi there!
Does someone have the firmware for the Giantarm D200 ?
I mean a firmware that you can read and change with the Arduino IDE, like Marlin.
I know I can update the firmware with easyprint3d and I already did that, but I really want to modify the firmware of this printer.
Do you know which firmware is running on it? Is it also Marlin?
Has anyone tried a custom firmware on this printer?
Any idea of the parameters, like board type, pins, etc.?
Sorry to tell you that GTM32 motherboard is not open source, so it is not Marlin firmware.
Re: Firmware for geeetech 3D printers
Posted: Tue Nov 21, 2017 11:50 pm
by argonaytis
Which firmware is for the E180 printer?
Re: Firmware for geeetech 3D printers
Posted: Wed Nov 22, 2017 4:22 pm
by William
argonaytis wrote: Tue Nov 21, 2017 11:50 pm
Which firmware is for the E180 printer?
You can go to the firmware download page and find it.
Re: Firmware for geeetech 3D printers
Posted: Sat Nov 25, 2017 12:25 am
by eltonaappl@gmail.com
Esperando firmware M201 Gtm32 Pro B