Metal short-distance J-head with cooling fan FILAMENT JAM

Post Reply
ramprasath
Posts: 1
Joined: Wed Jan 07, 2015 2:47 pm

Metal short-distance J-head with cooling fan FILAMENT JAM

Post by ramprasath »

Hi,

I bought a "Metal short-distance J-head with cooling fan" from you guys . I face a lot of filament jamming issues for nearly every print on a custom 3d printer .

I have used the "1 is 100k thermistor - best choice for EPCOS 100k (4.7k pullup)" in my marlin.

I dont know what I'm doing wrong . Is there anything that I have to do specifically to prevent filament jaming .
Top
john
Posts: 104
Joined: Fri Nov 14, 2014 1:45 pm

Re: Metal short-distance J-head with cooling fan FILAMENT JA

Post by john »

Hi Ramprasath,
Here are some reasons for filament jam,I think you may fix your problem and learn more about 3d printer.
http://www.geeetech.com/wiki/index.php/ ... w_Problems
http://www.geeetech.com/wiki/index.php/ ... D_printing
http://www.geeetech.com/wiki/index.php/ ... k_a_nozzle

Please leave message if you still if you still can't fix your problem.
Top
Post Reply

Return to “Extruder”