Page 1 of 1
Printer is Built. Now What?
Posted: Sat Mar 21, 2015 6:00 pm
by Zorce
Acrylic i3 Printer
So I have the printer built but there are no instructions on how to calibrate it or what I need for my PC to run it?
Are there links on this subject?
Thanks
Re: Printer is Built. Now What?
Posted: Mon Mar 23, 2015 9:47 am
by zhangxueyou
Re: Printer is Built. Now What?
Posted: Wed Apr 29, 2015 10:43 pm
by Hussain14
Greetings,
I had built the printer I3 B, but I got problem with the Pc software.
should I use Repetier-host or another one
when I connect the printer with the Pc, and then opening the repitier-host. i got a problem for testing the printer.
when I chose connect, no option appaer to me as your description. the only option is ( default).
Please help because i have spent more time to run the printer.I thought that it is strightforward, but according to the manual that you sent to me is not.
waiting your reply,
my email is (
Ha2008am@hotmail.com)
Regards,
Re: Printer is Built. Now What?
Posted: Thu Apr 30, 2015 10:02 am
by zhangxueyou
Hussain14 wrote:Greetings,
I had built the printer I3 B, but I got problem with the Pc software.
should I use Repetier-host or another one
when I connect the printer with the Pc, and then opening the repitier-host. i got a problem for testing the printer.
when I chose connect, no option appaer to me as your description. the only option is ( default).
Please help because i have spent more time to run the printer.I thought that it is strightforward, but according to the manual that you sent to me is not.
waiting your reply,
my email is (
Ha2008am@hotmail.com)
Regards,
Do you mean choosing the printer type? If so, only Repetier-Host costomerized by Geeetech has these options.
You can also download Repetier-Host at:
http://www.repetier.com/download-now/
Re: Printer is Built. Now What?
Posted: Thu Apr 30, 2015 6:29 pm
by Hussain14
Hi,
I already downloded the software, but the problen is that how to interface between the software and the printer.
when I press connect the following window appeared.I dont know if yoy can diagnose something from it.
- after uploding the file for printing and the press print, it took me to this window
- 01.JPG (76.86 KiB) Viewed 13957 times
Then, when I go to the printer selection. i cant see the yype of my printer.so I chosed classic printer as in the below picture:
- 02.JPG (55.94 KiB) Viewed 13957 times
after that, wen I upload a file for printing and press print, no thing happen,instead it take me to another window.moreover i noticed that the extruder temperture not changing and heating at all. so, please advice what to do.
- 03.JPG (53.12 KiB) Viewed 13957 times
after pressing print, it take me to this window directly,So please your recommecndation is required to rectify this problem.
thanks for you
- 04.JPG (73 KiB) Viewed 13957 times
Re: Printer is Built. Now What?
Posted: Fri May 01, 2015 4:28 pm
by Hussain14
hi,
Now, I have the following erroe,
- التقاط.JPG (55.96 KiB) Viewed 13957 times
what to do
Re: Printer is Built. Now What?
Posted: Mon May 04, 2015 11:21 am
by zhangxueyou
Baud rate should be 250000.
If you want to heat up the extruder and hot bed, you should click the 2 icons highlighted in the picture:
- QQ截图20150504111446.png (41.64 KiB) Viewed 13955 times
If you want to print with the stl file, you should let the software slice first, click "Slice with slicer" as shown in the picture:
- QQ截图20150504111702.png (9.98 KiB) Viewed 13955 times
Re: Printer is Built. Now What?
Posted: Mon May 04, 2015 10:40 pm
by Hussain14
hi,
I got now the Z and X motors rotate in the reverse action.I cant reverse the wiring.
So please send me the new firmware with reversing the direction of the rotation for the Z and X axis.( Y axis having now problem, when i press Y axis home,it go in the right direction)
my email is (
ha2008am@hotmail.com)
thanx,
Re: Printer is Built. Now What?
Posted: Mon May 04, 2015 10:42 pm
by Hussain14
my printer is I3 B, with Sanguinolo Board
please send me also for the ramp1.4 if available