Me Creator 2

[Kerby]

I have bought the 3D-printer "Me Creator 2" and try to start a Testprint but the extruder does not move in the middle of the Heatbed.

In the settings from the Me Creator 2-menu I selected “Auto-Home” and all axes X, Y and Z move to the stop ends correctly.
What am I doing wrong for the testprint

I used “Repetier-Host Software 1.6.1” to Slice any 3D-Objects and when I start the print, the filament comes correctly out, but the extruder don`t move in the middle to the Heatbed to start the print.
The Extruder hold on still in the Auto-Home position. I think the Headbed goes to the wrong side or


sorry my english is not so good, I hope you understand my problem with the Me Creator 2 Printer.
I hope you can help me


Best regards from Germany

[William]

Hello Kerby,the reason why it don't print in the center of the bed can be found in this post:viewtopic.php?f=24&t=18075&start=10,hope this can help you

[Kerby]

Hello,
thx for the link. I trust everyting from that in the seetings, but the extruder moved not in the middle the heatbed
the print started but still on the right corner. I do not know how to continue