I managed to assemble and manual test all XYZ and extruders motors of Geetech Rostock 301 that I bought via Banggood, August last year. But I found that the nozzle keep staying at Z=0 when I try to print a file. Would appreciate assistance from Geetech or Forum members to solve the issue. For info, I have not done any firmware refresh to the printer.
Regards
idrosahmad62
Nozzle does not go up during printing.
Re: Nozzle does not go up during printing.
When you calibrate the printer, use the offset option.
-
idrosahmad62
- Posts: 0
- Joined: Wed Nov 22, 2017 1:24 pm
Re: Nozzle does not go up during printing.
Thank you kaktus for your response. I will try and update.
Regards
Regards