Page 1 of 1
A thermistor in the head (hot end) and in the work table (heat bed)
Posted: Mon May 21, 2018 3:29 am
by _kaktus_
Hello.
A question to staff.
Please specify the types of thermistors used to measure the temperature in the head (hot end), and in the work table (heat bed).
Re: A thermistor in the head (hot end) and in the work table (hot bed)
Posted: Mon May 21, 2018 11:48 am
by Gingko
"100k thermistor - best choice for EPCOS 100k (4.7k pullup)"
Re: A thermistor in the head (hot end) and in the work table (hot bed)
Posted: Mon May 21, 2018 12:18 pm
by _kaktus_
Thank you, Gingko, for your reply.
So I understand that in both places there is mounted a glass thermistor NTC 100kΩ.
And whether you are able to specify a series.
Re:A thermistor in the head (hot end) and in the work table (heat bed)
Posted: Sat Jun 02, 2018 5:12 pm
by _kaktus_
The element with axial arrangement of leads is most probably the
MF58 series.
http://en.ampron.com/prod_view.aspx
.
- seria MF58
- termistor_NTC_MF58.jpg (25.73 KiB) Viewed 6297 times
The second type of thermistor can be the MF58D series.
http://en.ampron.com/prod_view.aspx
.
- seria MF58D
- termistor_NTC_MF58D.jpg (20 KiB) Viewed 6297 times