Geeetech

Posted: **Fri Aug 31, 2018 4:36 pm**

Hi guys!

Are you can't find Geeetech M201 on Cura?
Don't worry
Refer to these:
1.Download Cura Profile for M201.zip(the .json file for M201)

Cura Profile for M201.zip: (1.74 KiB) Downloaded 1091 times

------------------------------

--------------------------------------------------
------------------------------------------------------------------------------------
2. Unzip the zip file then you will get 3 files

: m201-1.png (5.53 KiB) Viewed 22692 times

------------------------------------------------------------------------------------
------------------------------------------------------------------------------------
3.Copy "Geeetech_M201.def.json" to the
Cura installation directory
Default:
C:\Program Files\Ultimaker Cura 3.1\resources\definitions

: m201-2.png (92.38 KiB) Viewed 22692 times

------------------------------------------------------------------------------------
------------------------------------------------------------------------------------
4.Copy "Geeetech_M201_extruder_0.def.json" and "Geeetech_M201_extruder_1.def.json"
to"C:\Program Files\Ultimaker Cura 3.1\resources\extruders"

: M201-3.png (90.11 KiB) Viewed 22692 times

------------------------------------------------------------------------------------
------------------------------------------------------------------------------------
5.Done!Enjoy it!

: M201-4.png (26.7 KiB) Viewed 22692 times

Posted: **Fri Aug 31, 2018 6:21 pm**

Perfectly.

Posted: **Thu Jan 31, 2019 6:38 am**

Hello, сan you upgrade to Ultimat Сure 4 ? Then he writes that the printer is not connected (visible in the lists of printers, connection via USB). Maybe you need to register the port number and speed? The driver does not have these fields.
For version 2.4 there is such a patch. Can you redo it for version 4?

Posted: **Sun Feb 03, 2019 6:16 pm**

Hello.

Yes, this problem is known to me ...
Have you tried to find a solution on the Cura forum

Posted: **Sun Feb 03, 2019 6:45 pm**

I wrote on the Cure forum https://community.ultimaker.com/topic/2 ... tech-m201/

Posted: **Sat Feb 16, 2019 4:19 pm**

Hello
I had two problems. Diameter of wire in 2.85 to be modified if necessary and it was necessary that I remove the temperature controls M109 it always printed at 200° even after modification.
First impeccable try thanks!

;

Posted: **Thu Dec 24, 2020 8:58 pm**

hi have you be able to cura
am having the same issues

Geeetech

How to add the printer I3 M201 to Cura

How to add the printer I3 M201 to Cura

Re: How to add the printer I3 M201 to Cura

Re: How to add the printer I3 M201 to Cura

Re: How to add the printer I3 M201 to Cura

Re: How to add the printer I3 M201 to Cura

Re: How to add the printer I3 M201 to Cura

Re: How to add the printer I3 M201 to Cura