M201 GTM32 vA source code
Posted: Fri Apr 24, 2020 5:18 am
I have a M201 with a GTM32 vA board and am needing the source code for the firmware so that i can move the hotbed pin to one of the un-used E1 or E2 pin locations, as the silk screen tracings on the board has failed. I have read the post and done all the test and the mosffet works properly but there's no output to the pins on the board. This is a 12v board, and 12v heat bed, that has to heating elements and they and the temp sensors all are good. If any one can help it would be greatly appreciated.