Geeetech

Forgot to give my address:

darraughbj@gmail.com

I have been printing almost non-stop with my machine (have gone through 3 kg of filament) and my printed parts are beginning to crack. I too would like to have the STL file in order to print some replacements.

I purchased the kit from Amazon, Order: 106-6565273-1087461

Thank you for your help, I have contacted them via the form on the "Contact Us" web site.

Images:

I purchased the 8mm acrylic kit from you via Amazon.com; Order: 106-6565273-1087461.

The thermistors work correctly, I have tested both with the bed temp input.
The extruder temp reads 0 despite all my efforts.

Yes, I have re-upload the firmware a few times. The problem persists.

I have now re-soldered the port on the board, more than double checked that the thermistors are good, and even shorted the pins with a jumper (should have given MAX temp) and have not solved anything. I still get MINTEMP. This must be a firmware issue or something else, but not a hardware issue as ...

I have checked the thermistors individually and cross checked them both in the bed temp port. Both thermistors appear to be working properly and give proper temperature readings for the bed temp. I will attempt re-soldering the terminal to the board and report my results.

Thank you, burned in perfectly.