Geeetech

Just check if your flow is not at 0%.
You may also reset the settings to default
Last thing, Update the firmware with arduino 1.8.5

I had also to change the Steps/mm from 340 to 100 due to the change of extrudeurs gears dimensions. It's really better now !!!
The issue seems to be the poor quality of the extrudeurs provided with the A10M....

I have changed the 2 extrudeurs and its working better. I had to update the firmware to reverse the motors. I also need to adjust the step/MMS

The 2 motors seems to work correctly. I also see the gears turning when the motors are working.
To check the space between the gear and the idle how do I do ? I need to disassemble the mechanism ?

Thanks

Dear fellow A10M users,

I have an issue with my A10M : No filament going out of the hot end. It's not clogged because I have cleaned it and finally changed it by a new one with the exact same issue.

I also changed the PTFE by new ones and check the connectors too. Everything seems to be alright ...