problem with firmware A10

Dante Occhibove · Post by **Dante Occhibove** » Wed Oct 07, 2020 8:23 pm

hi all, I was updating the firmware of the A10 with the Cable and Cura ..... suddenly 2 black block lines appeared on the display.. help me

Post by **Admin** » Thu Oct 15, 2020 11:32 am

Hello, you can re-plug the LCD screen cable, there may be a problem with the cable. If it still cannot be removed, there may be a hardware problem. You can contact geeetech's technical support page for help.

Geeetech

problem with firmware A10

problem with firmware A10

Re: problem with firmware A10