CONNECTING AND HEAT BED

bandit · Post by **bandit** » Thu Apr 02, 2015 11:32 pm

hI THIS IS A NEW PRINTER OUT OF THE BOX, I HAVE DOWN LOADED THE SOFTWARE FROM THE WEB SITE REPETIER HOST. AND EVEN THE EXTRUDER IS NOT HEATING UP. CAN YOU HELP ME WITH THIS PROBLEM THANKS

zhangxueyou · Post by **zhangxueyou** » Fri Apr 03, 2015 10:11 am

Is the extruder connected correctly? What is mainboard type?

bandit · Post by **bandit** » Sat Apr 04, 2015 7:25 am

THE MAIN BOARD IS SANQUINOLOLU REV. 1.3A

bandit · Post by **bandit** » Sat Apr 04, 2015 7:27 am

EXTRUDER IS CONNECTED RIGHT AS FAR AS I CAN SEE

zhangxueyou · Post by **zhangxueyou** » Sat Apr 04, 2015 2:10 pm

Did you change something of firmware? Where is your firmware from?

bandit · Post by **bandit** » Sat Apr 04, 2015 7:26 pm

THE FIRMWARE FROM THE REPITIER HOST WHICH WAS DOWNLOADED

bandit · Post by **bandit** » Sat Apr 04, 2015 7:27 pm

NOTHING WAS CHANGED, THE FIRMWARE IS REPETIER HOST

zhangxueyou · Post by **zhangxueyou** » Tue Apr 07, 2015 3:00 pm

RepetierHost is not firmware, it is a software used to print model online, control the printer, and save stl files as g-code file to print offline.

bandit · Post by **bandit** » Tue Apr 07, 2015 5:25 pm

I KEEP TELLING YOU THE PRINTER HAS NO POWER, NEED NEW POWER SUPPLY AND MAT BE NEW BOARD

bandit · Post by **bandit** » Tue Apr 07, 2015 5:27 pm

HELLO!
I KEEP TELLING YOU THAT THE PRINTER IS DOA. THERE IS NO POWER COMING OUT OF THE PRINTER, NO LIGHTS NOTHING

Geeetech

CONNECTING AND HEAT BED

CONNECTING AND HEAT BED

Re: CONNECTING AND HEAT BED

Re: CONNECTING AND HEAT BED

Re: CONNECTING AND HEAT BED

Re: CONNECTING AND HEAT BED

Re: CONNECTING AND HEAT BED

Re: CONNECTING AND HEAT BED

Re: CONNECTING AND HEAT BED

Re: CONNECTING AND HEAT BED

Re: CONNECTING AND HEAT BED