FriendlyArm mini2440 with LCD P35+ Windows CE does not start
Posted: Thu Nov 13, 2014 11:40 pm
Dear Friend,
In October we bought 20 pieces MINI2440.And the Windows CE doesn't start . I use nboot_P35.bin, superboot2440.bin and NK_P35.bin that you sent to me recently. In MINI2440 which I ordered in May, everything is alright. I checked everything in the Minitools. LCD P35 is the same (I connected the display to the older MINI2440), computer is the same (S3C2440 400MHz / 64MB / 1GB(SLC) ID:ECD35195). Linux is loaded correctly, I checked it. It differs only bootloader in NOR (old works well - Superboot-2440 V1.1(20130529) by FriendlyARM) new works badly (Superboot-2440 V1.3a(20131213) by FriendlyARM) - Linux loads correctly, Windows incorrectly.
I checked upload to the bootloader in NAND both nboot.bin and superboot2440.bin.
Please reply how upload to new MINI2440 Windows CE 6.0. I think the bootloader superboot have been changed and Windows don't start.
Please kindly help me to solve the problems. I need MINI2440 witz Windows CE.
And I have some questions.
1. Do you have a Windows CE 6.0 version of the Russian?
2. Do you have a simple instruction how to prepare own Windows CE for FriendlyARM MINI2440?
3. Required tools (VS??, a Builder?...) to prepare own Windows CE?
4. Please send ( or give the link) files to compile Windows for mini2440 with LCD display P35 (on the cd do not have these files).
Best Regards
Piotrek_em
In October we bought 20 pieces MINI2440.And the Windows CE doesn't start . I use nboot_P35.bin, superboot2440.bin and NK_P35.bin that you sent to me recently. In MINI2440 which I ordered in May, everything is alright. I checked everything in the Minitools. LCD P35 is the same (I connected the display to the older MINI2440), computer is the same (S3C2440 400MHz / 64MB / 1GB(SLC) ID:ECD35195). Linux is loaded correctly, I checked it. It differs only bootloader in NOR (old works well - Superboot-2440 V1.1(20130529) by FriendlyARM) new works badly (Superboot-2440 V1.3a(20131213) by FriendlyARM) - Linux loads correctly, Windows incorrectly.
I checked upload to the bootloader in NAND both nboot.bin and superboot2440.bin.
Please reply how upload to new MINI2440 Windows CE 6.0. I think the bootloader superboot have been changed and Windows don't start.
Please kindly help me to solve the problems. I need MINI2440 witz Windows CE.
And I have some questions.
1. Do you have a Windows CE 6.0 version of the Russian?
2. Do you have a simple instruction how to prepare own Windows CE for FriendlyARM MINI2440?
3. Required tools (VS??, a Builder?...) to prepare own Windows CE?
4. Please send ( or give the link) files to compile Windows for mini2440 with LCD display P35 (on the cd do not have these files).
Best Regards
Piotrek_em