Hi Guys, I bought a new Prusa I3 Pro B but I have a lot of problems. I've done many attempts and i also changed the printer these are mine results (attachments) ( it should be a cube...). I find out that there is surely a problem of subextrusion but i changed the esteps and it seems that now it's ok. I print with Repetier and slice with cura with the params that i found here https://www.geeetech.com/forum/viewtopic.php?t=60980
one of the main problems is that the filament extruded is not "clear" it seems that is over-melted, i think that the pictures describe better what i mean
Problems with extrusion
Problems with extrusion
- Attachments
-
- WIN_20200510_15_46_17_Pro.jpg (197 KiB) Viewed 4590 times
-
- WIN_20200510_15_46_04_Pro.jpg (192.06 KiB) Viewed 4590 times
-
- WIN_20200510_15_45_55_Pro.jpg (184.4 KiB) Viewed 4590 times
Re: Problems with extrusion
Hi，what is your printing temperature? You can try lowering the temperature.
-Keep your mind and try to test it. 
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
Re: Problems with extrusion
i put 200° for the extruder
Re: Problems with extrusion
Hi!
level the bed again, and low to 190º the hotend temperature, and 50º for the bed.
Best regards.
level the bed again, and low to 190º the hotend temperature, and 50º for the bed.
Best regards.
Please, support my collaboration, buy me a Kofi https://ko-fi.com/lachusmadeti THANKS!!