mintemp error

[zhangxueyou]

When take some pictures of LCD screen when you are heating. It'd better be 3-4.

[ii3edus]

is there a email address to send these pictures to? they're to large to attach

[zhangxueyou]

Hi, ii3edus
My email address is : Cheung.Weng@geeetech.cn

[zhangxueyou]

I am sorry, I can't see anything abnormal when you are heating through the pictures. But I guess that the LCD displays 0 degree when not heating according to your pictures, right?
Could you please take a video and upload it to the Internet? Say something in the video if necessary.

[ii3edus]

have you received the new emailed pics?

[zhangxueyou]

The latest email I receive from you is on March 20th. I saw those pictures, but I can't tell what's wrong with your printer. I can only guess that the LCD displays 0 degree when not heating according to your pictures. So I need a video to figure it out.

[ii3edus]

0/0 left side is supposed to be thermistor reading while right side is "set temp" 0 degree c is 32 degree f. its 75 in the room

[zhangxueyou]

The LCD displays Celsius degree. 32°F equals 0°C.
There is a transforming formula: F=1.8xC+32.
If the temperature you set is 100 degrees, it equals 212°F.

[zhangxueyou]

We approve every post in case of spam. I am sorry for your inconvenience.

[ii3edus]

i know that and thats not the problem. the issue it that the temp is reading 0 at room temp. when it should be reading 24. other printer companys when you turn the printer on it tells the temp of the hot end before you give a temp command. a constant temp reading regardless of whether heated or not. does this printer not do that