Depending on filament, nozzle etc. You should change it from 1.0 to 1.1 or 1.2.
extruder extruding too slow!!!!
Re: extruder extruding too slow!!!!
Have You tried to change the extrusion multiplier for the filament?
Depending on filament, nozzle etc. You should change it from 1.0 to 1.1 or 1.2.
Depending on filament, nozzle etc. You should change it from 1.0 to 1.1 or 1.2.
-
vykiholmes
- Posts: 2
- Joined: Fri Jan 04, 2019 11:43 pm
- Location: UK
Re: extruder extruding too slow!!!!
hi
i've had same prob only extruder is fine when manually send code to extrude 1-100mm but during prints it just wasn't coming out.
My fix consisted of e step calibration & firmware update.
i've had same prob only extruder is fine when manually send code to extrude 1-100mm but during prints it just wasn't coming out.
My fix consisted of e step calibration & firmware update.
Re: extruder extruding too slow!!!!
Could you attach the gcode file?vykiholmes wrote: Wed Feb 20, 2019 1:28 pm hi
i've had same prob only extruder is fine when manually send code to extrude 1-100mm but during prints it just wasn't coming out.
My fix consisted of e step calibration & firmware update.
We can use it and test it.
cheers
-Keep your mind and try to test it. 
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!