Connection and print fails with Windows 10

[gpau]

Easy Print does not print, the com serial port is recognized because it feels the connection signal with the PC, but when the print order prints the Geeetech i3 Pro C does not start. Is not Windows 10 a problem or a driver?
Thank you

[William]

You should ensure the drive install correct and open the bottom of power

[gpau]

When I start the program and go to the printer hyphen button, geeetech is recognized by the PC, but when the print order does not print.
It sounds weird that it does not work on two PCs.
Thank you

[hnswbr]

Please help me I have the same problem. I tried everything, I am exhausted

[William]

Hi,hnswbr

You need to attach more details of it.
Then we can help to check it.
1.The PSU output is 12V/24V.
2.Try to replace the old PSU then test it again
3.Refer to this post and install the drivers for your win10
http://www.geeetech.com/forum/viewtopic ... 974#p81974

[hnswbr]

Hi,hnswbr

You need to attach more details of it.
Then we can help to check it.
1.The PSU output is 12V/24V.
2.Try to replace the old PSU then test it again
3.Refer to this post and install the drivers for your win10
http://www.geeetech.com/forum/viewtopic ... 974#p81974

William you a good guy. You saved my life.