Geeetech A30 Cura 4 Print Head Settings

Post Reply
projectquad
Posts: 2
Joined: Wed Jun 05, 2019 1:56 am

Geeetech A30 Cura 4 Print Head Settings

Post by projectquad »

Hi everyone

Just received my Geeetech A30 printer, loaded Cura 4 and used the creality cr10 profile, the printed bench boat was perfect. Change the printer to the default geeetech a30 cura 4 ships with and tried another print, it was terrible, could not compare. So i noted the creality cr10 profile was far superior in print quality.

After some thought, before i try larger prints please could you help me confirm the print head settings are correct? See attached image.
Attachments
Cura 4 Creality Cr10 profile used on Geeetech A30
Cura 4 Creality Cr10 profile used on Geeetech A30
Capture.PNG (22.5 KiB) Viewed 13439 times
User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Geeetech A30 Cura 4 Print Head Settings

Post by William »

Hi, Your printhead settings should be changed.
If you are using cura4.4, you can find the A30 printer.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
projectquad
Posts: 2
Joined: Wed Jun 05, 2019 1:56 am

Re: Geeetech A30 Cura 4 Print Head Settings

Post by projectquad »

Hi William

I tested the A30 profile in Cura 4 and the print was terrible, using the creality cr10 profiles my prints were perfect. however this was tested in a 150mm x 150mm x 150mm model, i am afraid to use the same creality cr10 profile print head settings for much larger prints. Please could you help me with configuring the Cura 4 creality cr10 profile print head settings to work as it should with the A30?
User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Geeetech A30 Cura 4 Print Head Settings

Post by William »

Hi, I find this. and you can refer to this:https://www.youtube.com/watch?v=yY2QvpWOXYE
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
Diane90
Posts: 1
Joined: Mon Dec 16, 2019 12:20 pm

Re: Geeetech A30 Cura 4 Print Head Settings

Post by Diane90 »

William wrote: Wed Dec 04, 2019 9:11 am Hi, I find this. and you can refer to this:https://www.youtube.com/watch?v=yY2QvpWOXYE
Thank you for posting something like this
Post Reply