Pitting , Hole , Defect on printing

zhangxueyou · Post by **zhangxueyou** » Thu Apr 09, 2015 11:17 am

Your slicer setting is so bad. Look at the picture, the blue one , which is so bad that I even don't want to continue printing, is printed with your settings, and the green oneis printed with my settings. You can try my settings (attachment), and modify some parameters properly as I suggested you before .

: QQ截图20150409111242.png (451.35 KiB) Viewed 13293 times

slicer settings(1.75-0.3).rar: (719.11 KiB) Downloaded 560 times

begizmo · Post by **begizmo** » Thu Apr 09, 2015 5:01 pm

Hi
Thank for you recommend .
I try to load chinese chess like yours for compare
Overall about pitting , hole and first layer it is better

But I see new problem

I think my x or y or ? axis will be problem

: FullSizeRender (56).jpg (77.15 KiB) Viewed 13260 times

: FullSizeRender (57).jpg (77.87 KiB) Viewed 13260 times

Could you seggest me ?
My circle chess it is not round and top surface not smooth .

Thank in advance ^^

zhangxueyou · Post by **zhangxueyou** » Fri Apr 10, 2015 12:02 pm

Did you use my settings? Please print this test file with SD card.

Test_40x30x10_PLA_1.75_0.3.rar: (16.15 KiB) Downloaded 513 times

begizmo · Post by **begizmo** » Fri Apr 10, 2015 1:59 pm

: FullSizeRender (59).jpg (80.55 KiB) Viewed 13256 times

: FullSizeRender (60).jpg (87.3 KiB) Viewed 13256 times

: FullSizeRender (61).jpg (89.21 KiB) Viewed 13256 times

zhangxueyou · Post by **zhangxueyou** » Fri Apr 10, 2015 2:05 pm

PLA or ABS?

begizmo · Post by **begizmo** » Fri Apr 10, 2015 2:15 pm

ABS sir
I already change temperature in your gcode to 230 c

zhangxueyou · Post by **zhangxueyou** » Fri Apr 10, 2015 2:49 pm

Turn off the printer, is it easy to manually move X and Y axes?

begizmo · Post by **begizmo** » Fri Apr 10, 2015 2:55 pm

Yes it easy

zhangxueyou · Post by **zhangxueyou** » Fri Apr 10, 2015 3:23 pm

Tighten the belts a bit, not too much. Maybe they are too loose.

email4walker · Post by **email4walker** » Fri Apr 10, 2015 10:13 pm

Hi begizmo,

I used to get bad prints like yours when I first started. It is a settings issue. Try lowing your print speed on the perimeter. I use MatterControl for my 3D printing software/interface. How it works is not really better than the other one, but it has a way better visual look. Also, you can click the help on it and it tells you what every setting does. No more guessing what a setting will do. Either way, try slowing down your print speed. That will help some. Thanks.

Oh yeah, it is free:

http://www.mattercontrol.com/

Geeetech

Pitting , Hole , Defect on printing

Re: Pitting , Hole , Defect on printing

Re: Pitting , Hole , Defect on printing

Re: Pitting , Hole , Defect on printing

Re: Pitting , Hole , Defect on printing

Re: Pitting , Hole , Defect on printing

Re: Pitting , Hole , Defect on printing

Re: Pitting , Hole , Defect on printing

Re: Pitting , Hole , Defect on printing

Re: Pitting , Hole , Defect on printing

Re: Pitting , Hole , Defect on printing